我們機箱機柜產品在使用過程中，我們?yōu)榱吮ＷC產品能夠在惡劣環境下的正常使用，需要對其進行工藝處理，這樣才能保證機箱機柜能夠長期的使用在任何環境下。

During the use of our chassis and cabinet products, in order to ensure their normal use in harsh environments, we need to carry out process treatment to ensure that the chassis and cabinet can be used in any environment for a long time.

說到機箱機柜的工藝處理，在機箱機柜成型后，需要對其進行一些有效的處理，那么成型后還需要對其進行哪里工藝呢?下面我們一起來了解。

When it comes to the process treatment of chassis and cabinets, after the chassis and cabinets are formed, some effective treatment is needed. So, what other processes are needed for them after forming? Let's learn together below.

所有的產品在成型后都需要對它們進行一些有效的處理，我們需要對其外表層進行處理，只有外表層處理得當才能使它的壽命延長，并且提高性能。

All products require effective treatment after molding. Firstly, we need to treat their outer layer. Only when the outer layer is properly treated can its lifespan be extended and performance improved.

噴涂與電鍍處理是機箱機柜表面處理常使用的方式，它的作用是防銹、防靜電，同時還可以形成一層保護膜。當并不是機箱機柜所有格的表面都要做噴涂和電鍍處理。一般機箱機柜內部較少做漆化。

Spray painting and electroplating treatment are commonly used methods for surface treatment of chassis and cabinets. Their function is to prevent rust, static electricity, and also to form a protective film. When not all surfaces of the chassis and cabinet are required to be sprayed and electroplated. Generally, high-quality chassis and cabinets are less painted inside.

不僅僅是機箱機柜表面處理，良好的散熱性對于機箱機柜來說也是非常重要的。然而機箱機柜的散熱離不開風扇，通過你放入設備發熱量的大小來考慮風扇的配置。通常來說，機箱機柜頂部都有兩到四個風扇,側壁風扇應安裝在機箱機柜后壁，為什么要這樣做呢，其原因是設備后部會產生大量熱量為了及時把熱量排出所以要再側壁風扇安裝在機箱機柜后壁。

Not only the surface treatment of the chassis and cabinet, but also good heat dissipation is very important for the chassis and cabinet. However, the heat dissipation of the chassis and cabinet cannot be separated from the fan. Consider the configuration of the fan based on the amount of heat generated by the device you put in. Generally speaking, there are two to four fans on the top of the chassis cabinet, and the side wall fan should be installed on the back wall of the chassis cabinet. Why do we do this? The reason is that a large amount of heat is generated at the back of the equipment, so the side wall fan needs to be installed on the back wall of the chassis cabinet in order to timely dissipate the heat.

外表層處理以及散熱性處理對于機箱機柜來說都是特別重要的，這兩樣做好了對配電箱來說性能會更強。

The surface treatment and heat dissipation treatment are particularly important for the chassis and cabinet, and if they are done well, the performance of the distribution box will be stronger.